What is the sequence for installing Zero Formaldehyde Doors

2026,11,02

First, locate the Simple Style Zero Formaldehyde Doors cover and stand plate, align the joint according to the back number, and ensure that the joint is on the same plane. Apply glue to the joint.

2. Install Simple Style Zero Formaldehyde Doors kit

Place the firmly assembled Simple Style Zero Formaldehyde Doors cover as a whole into the Simple Style Zero Formaldehyde Doors hole, and use small wooden strips to roughly fix the Simple Style Zero Formaldehyde Doors cover around. The two sides of the Simple Style Zero Formaldehyde Doors cover should be on the same plane as the wall. Then check whether the Simple Style Zero Formaldehyde Doors cover is perpendicular to the ground, whether the two corners of the Simple Style Zero Formaldehyde Doors cover top plate and the two upright plates are right angles, and whether the Simple Style Zero Formaldehyde Doors cover upright plate is bent. Twist the iron pieces at both ends to wrap around the wall.

3. Install Simple Style Zero Formaldehyde Doors fan

First, open the hinge slot. The distance between the hinge slot and the two ends of the Simple Style Zero Formaldehyde Doors fan should be 1/10 of the height of the Simple Style Zero Formaldehyde Doors fan.

4. Install Simple Style Zero Formaldehyde Doors lock

After installation, check whether the Simple Style Zero Formaldehyde Doors fan and Simple Style Zero Formaldehyde Doors lock switch are flexible, whether the seam is flexible, and whether the seam meets the specifications.

5. Install Simple Style Zero Formaldehyde Doors wiring

Cut the Simple Style Zero Formaldehyde Doors wiring with a right angled edge into a 45 degree angle, trim it with a carpenter, insert the right angled edge into the Simple Style Zero Formaldehyde Doors wiring groove, and use floor glue to firmly bond the Simple Style Zero Formaldehyde Doors wiring with the Simple Style Zero Formaldehyde Doors wiring board.

6. Install Simple Style Zero Formaldehyde Doors suction in the corresponding position.

Author:

Mr. huangting

E-mail:

2857027086@qq.com

Phone/WhatsApp:

+86 13193113493